πŸ‡ΊπŸ‡ΈPlease Note: We currently ship orders nationwide within the United States.

Packing Tape Guide: Which Shipping Tape to Use

Carrier and marketplace rules checked on November 16, 2026, against the USPS Domestic Mail Manual, the UPS and FedEx packing guides, Walmart Marketplace Learn and 3M's product pages. Rules change, so confirm the current version before a big shipping run.

Packing tape looks like the simplest thing in a shipping room, and that is why it gets so little thought. Yet a box that pops open on a conveyor, or a seal that lets go in a cold truck, can turn a good order into a damage claim, a return or a refused inbound shipment. With holiday shipping in full swing, here is a plain-English guide to choosing the right shipping tape: adhesive types, thickness, width, how to tape a box the way carriers ask, and the tapes you should never use on a parcel.

Quick answer: which packing tape should you use?

  • For most shipping boxes: a clear or tan pressure-sensitive packing tape about 2 inches wide (sold as 1.88 inches, or 48 mm). FedEx asks for tape at least 2 inches wide.
  • For heavy, overstuffed or recycled boxes: a heavy-duty hot melt tape around 3 mil thick, or a 3-inch tape.
  • For cold, hot or humid storage, or boxes kept for months: an acrylic tape, which holds up better to temperature swings and aging.
  • Never use: masking tape, cellophane (household) tape, duct tape, string or twine to seal a parcel. USPS, UPS and FedEx all say so.
  • How to tape: the "H" method, with one strip down the center seam and one across each edge seam, on both the top and the bottom.

What the carriers say about packing tape

The three big U.S. carriers agree on the basics, with small differences in wording:

  • USPS: its Domestic Mail Manual page on preparing packages says to use clear or brown packaging tape, reinforced packing tape or paper tape, and not to use cord, string, twine, masking tape or cellophane tape.
  • UPS: its packing guide says to use only shipping tape and to securely seal closures and seams. It lists masking, cellophane, duct and water-activated paper tapes, string and paper over-wrap as things not to use.
  • FedEx: its How to Pack guide asks for pressure-sensitive plastic tape, water-activated paper tape (minimum 60-lb. grade) or water-activated reinforced tape, at least 2 inches wide, applied with the H taping method. It says not to use cellophane tape, duct tape, masking tape, string or rope.

Note the one real difference: USPS and FedEx accept paper (water-activated) tape, while UPS's guide lists water-activated paper tape among the tapes not to use. If you ship with more than one carrier, plastic pressure-sensitive packing tape is the choice all three accept.

Hot melt vs. acrylic packing tape

Almost all clear and tan box-sealing tape uses one of two adhesives.

Hot melt

Hot melt adhesive (a synthetic rubber resin) grabs quickly and has strong holding power, so it is the usual pick for everyday shipping and for heavier boxes. It is the adhesive in most "heavy duty" shipping tapes. 3M, for example, lists its Scotch Heavy Duty Shipping Packaging Tape (3850) as a solvent-free hot melt tape with a typical thickness of 3 mil, and says it holds on all box types, including 100% recycled boxes, with one strip per seam. Hot melt tape can lose some grip in very cold or very hot spaces and can yellow over long storage.

Acrylic

Acrylic adhesive takes a little longer to reach full strength but stays clear, resists UV light and aging, and handles temperature and humidity swings better. That makes it a good fit for long-term storage, refrigerated or outdoor areas and lighter boxes. "Storage" packaging tapes are usually acrylic.

Which one should you buy?

For boxes that ship within days, choose hot melt. For boxes that sit in a hot warehouse, a cold truck or a storage unit for months, choose acrylic. Many shipping rooms keep both.

Tape thickness (mil) explained

Tape thickness is measured in mils, where one mil is one thousandth of an inch. Thicker tape resists splitting, tearing and punctures better and usually carries more adhesive. A simple way to choose:

  • Around 1.6 to 2 mil (standard or economy): light boxes, envelopes and mailers, office use.
  • Around 2.5 to 3 mil (heavy duty): most e-commerce shipping, boxes up to the 50 lb range, recycled corrugated.
  • 3 mil and up (premium or extra heavy duty): heavy, dense or overstuffed cartons and rough handling.

Grades are not standardized across brands, so compare the thickness printed on the package rather than words like "heavy duty" alone.

2-inch vs. 3-inch packing tape

Two-inch tape (1.88 inches, or 48 mm) fits standard handheld tape guns and covers most parcel boxes. Three-inch tape (about 72 mm) covers more of the seam in one pass, which helps on large or heavy cartons and on boxes headed to a fulfillment center, but it needs a 3-inch dispenser. If most of your boxes are small to medium, 2-inch heavy duty tape is the practical standard.

How to tape a shipping box: the H method

  1. Close the flaps fully and make sure the box is not bulging. An overstuffed box puts the tape under constant strain.
  2. Run one strip along the center seam where the flaps meet, overlapping a few inches down each side.
  3. Run one strip across each edge seam, forming an "H".
  4. Repeat on the bottom. The bottom carries the weight, so never skip it.
  5. Press the tape down firmly with your hand or the dispenser. Pressure-sensitive tape needs pressure to bond.
  6. Keep tape off barcodes and shipping labels. Tape glare can stop a scanner from reading a label.

For heavy boxes, add a second strip on the center seam or switch to 3-inch tape.

Tape rules for Amazon FBA and Walmart WFS shipments

When you send inventory to a marketplace fulfillment center, the carton has to survive the trip and the receiving line. A few points to know:

  • Walmart WFS: Walmart's guide on containers and dunnage says not to bundle boxes together using bagging, taping, elastic or extra straps. Each case travels and is received on its own, and cases must be sturdy (RSC, B flute, ECT-32 or 200 lb burst strength).
  • Amazon FBA: Amazon's beginner prep guide says to remove, cover or black out old barcodes on the outside of shipping boxes, and opaque tape is one way to cover them. Clear tape does not hide a barcode.
  • Both: one box ID or receiving label per box, on a flat side away from seams, and never tape over the label's barcode.

For box size, weight and packing material limits, see our guide to Amazon FBA and Walmart WFS carton rules on the SNILLC blog.

Common packing tape mistakes

  • Using household cellophane or masking tape to seal a shipping box.
  • Taping only the top seam and leaving the bottom flaps unsealed.
  • Wrapping a box in tape over and over instead of sealing the seams properly.
  • Taping over the shipping label or barcode.
  • Choosing thin economy tape for heavy or recycled boxes.
  • Storing tape rolls in a hot spot, which can soften the adhesive and make the roll hard to unwind.

Frequently asked questions

Can I use duct tape to seal a shipping box?

No. UPS and FedEx both list duct tape among the tapes not to use for sealing packages. Use pressure-sensitive packing tape instead.

Can I use Scotch tape or masking tape for shipping?

No. Cellophane (household) tape and masking tape are not strong enough, and USPS, UPS and FedEx all say not to use them on parcels.

What width of packing tape do I need?

For most boxes, 2-inch tape (1.88 inches, or 48 mm). FedEx asks for tape at least 2 inches wide. Use 3-inch tape for large or heavy cartons.

Is hot melt or acrylic tape better?

Hot melt grabs faster and holds stronger for everyday shipping. Acrylic is better for long-term storage, temperature swings and staying clear over time.

What does mil mean on packing tape?

A mil is one thousandth of an inch. Standard tape is often around 2 mil, and heavy duty shipping tape is often around 3 mil.

Can I tape two boxes together to ship to Walmart WFS?

No. Walmart says not to bundle boxes using bagging, taping, elastic or extra straps.

Can I use paper tape?

USPS and FedEx accept water-activated paper tape (FedEx asks for at least 60-lb. grade), but UPS's packing guide lists water-activated paper tape among the tapes not to use. If you ship UPS, stick with plastic packing tape.

Does clear tape cover an old barcode?

No. Scanners can read through clear tape. Use opaque tape, a label or a black marker to cover old barcodes.

Sources

  • USPS Domestic Mail Manual 100, Preparing Packages (checked November 16, 2026)
  • UPS, How to Pack Your Shipments (checked November 16, 2026)
  • FedEx, How to Pack guide (checked November 16, 2026)
  • Walmart Marketplace Learn, WFS inbound orders: Select containers and dunnage (checked November 16, 2026)
  • Amazon, FBA prep, packaging and labeling beginner's guide (checked November 16, 2026)
  • 3M product page, Scotch Heavy Duty Shipping Packaging Tape 3850 (checked November 16, 2026)

Stock up on shipping tape with SN International LLC

At SN International LLC (SNILLC), we stock packing tape, tape guns and shipping supplies from brands like Scotch and Duck, along with the office, school and facility supplies businesses use every day. Everything we sell is 100% genuine brand-name product from the brand, never counterfeit or closeout. You get B2B wholesale pricing and B2C retail in one store, nationwide shipping from California, and real people on the phone Monday to Friday. We also help sellers with prep, labeling and fulfillment work. For genuine products and some of the most competitive service in the business, shop or contact us at snillc.com.

0 Comments

    Leave A Reply

    Your email address will not be published. Required fields are marked *