🇺🇸Please Note: We currently ship orders nationwide within the United States.

Display Tips for Craft Fairs and Exhibits

The best craft fair display tips come down to three things: a stable surface, items that are easy for shoppers to see, and a way to keep small pieces from sliding or tipping when the table gets bumped. For that last part, many vendors and exhibitors use a clear exhibit display gel such as ZYGLUE™ Museum Gel under glass, ceramic and other small pieces at indoor events.

A booth sees a lot of traffic in one day. Shoppers lean on tables, kids brush past, neighbors set up next to you, and every bump moves your display a little. The tips below cover how to plan a booth that holds up, how to use museum gel at an event, and the limits to keep in mind.

How do you plan a steady craft fair display?

  • Start with a smooth, flat base. Tablecloths look nice, but fabric is not a good surface for museum gel. Set small items on a glass tray, acrylic riser, glazed tile or sealed board placed on top of the cloth.
  • Build height with risers, not stacks. Acrylic and metal risers give you levels without wobbly piles of boxes.
  • Keep fragile pieces back from the front edge. The front of the table gets the most bumps from bags and hands.
  • Group items by size. Tall, narrow pieces such as vases and candle holders tip most easily, so give them the steadiest spot.
  • Leave room to pick things up. Shoppers want to handle items, so space pieces so one can be lifted without knocking another.

How does exhibit display gel help at events?

Museum gel is a clear, removable gel placed under display items to help keep them from sliding or tipping on flat surfaces. The ZYGLUE user manual explains that it holds by forming a micro-vacuum between the gel and a smooth surface, not by stickiness. It is clear and odorless, so it does not take attention away from your work.

At a craft fair, that means a glass vase, a glazed ceramic figurine or a crystal piece on a riser is less likely to move when the table is bumped. Because it is removable and reusable, you can take the booth down at the end of the day and use the gel again at your next show. New to museum gel? Start with What Is Museum Gel?

ZYGLUE chart showing which surfaces museum gel works best on

Which booth surfaces work with museum gel?

  • Best: glass, crystal, glazed ceramic, porcelain, metal, sealed marble and granite, acrylic.
  • Test a small hidden spot first: finished or polished wood, painted, lacquered or plastic surfaces, antique finishes.
  • Not for: unfinished wood, raw or porous stone, paper, cork, fabric or wallpaper. The manual warns the gel may leave permanent oil stains on porous materials.

Use ZYGLUE on horizontal surfaces only. Do not use it on pegboard, grid walls, angled shelves or to hang frames, where the gel can slide and the item can fall. Heavy or irregular-shaped items may not hold securely.

How do you use museum gel at a booth?

  1. Clean first. Wipe each item base and the riser or tray so both are clean, dry and free of dust or oil.
  2. Use a small amount. Take a pea-size piece with clean hands or the spatula. Two to four pea-size beads hold most small items. Too much gel reduces performance.
  3. Apply and press. Put the gel on the bottom of the item, place it and press down gently. Keep the gel away from the edges.
  4. Let it set. Leave the display undisturbed for 30 to 60 minutes, so set up early before doors open.

When a shopper buys a piece, twist it gently and lift; do not pull straight up. Roll any leftover gel off by hand and wipe the base with a dry cloth before wrapping it.

Is museum gel good for outdoor craft fairs?

No. ZYGLUE is for indoor use. The gel softens above 40 °C (104 °F) and should be kept out of direct sun and hot areas, where it can lose grip and leave residue. Use it at indoor craft fairs, trade show halls, gallery exhibits and other events held inside. Even indoors, keep your gel-held pieces away from hot lights and sunny windows.

Packing tips for vendors

  • Close the jar cap tightly between shows. An opened jar lasts about 18 months with the cap closed.
  • Store your jars somewhere cool and dry, not in a hot vehicle.
  • Keep the jar out of reach at the booth, away from children, and avoid eye contact with the gel.
  • Bring the spatula so you can portion gel without handling it too much.

Which ZYGLUE pack should exhibitors buy?

ZYGLUE Clear Museum Gel 2 Pack with two jars and spatulas

The ZYGLUE 2 Pack suits most vendors: two 4.2 oz (120 g) jars, 8.4 oz (240 g) in total, with two spatulas. Keep one jar in your booth kit and one at home for your studio shelves.

Pick your pack chart comparing ZYGLUE 1, 2 and 3 packs
  • 1 Pack: 1 jar, 4.2 oz (120 g), 1 spatula.
  • 2 Pack: 2 jars, 8.4 oz (240 g), 2 spatulas.
  • 3 Pack: 3 jars, 12.6 oz (360 g), 3 spatulas.

Frequently asked questions

How much gel do I need?

Two to four pea-size beads hold most small items. Use more beads for a larger or heavier base.

Does heat affect it?

Yes. The gel softens above 40 °C (104 °F), so keep it out of direct sun and hot areas.

How do I remove it?

Twist the item gently; do not pull straight up. Roll any leftover gel off with your fingers.

Is it reusable?

Yes. The same gel can be reused when you rearrange a display.

Can I use it on walls or to hang frames?

No. It is for horizontal surfaces only.

Buy ZYGLUE Museum Gel from SN International

ZYGLUE is SN International's own brand of clear museum gel. You can buy it at retail as a guest or with a free account. Businesses, gift shops and resellers can apply for a business account to see member pricing. Orders ship nationwide from our California warehouse, and real people answer the phone Monday to Friday. See all three packs on the ZYGLUE brand page.